How To Reset Oil Light On Honda Accord 2012. Gear to the park position. The engine oil indicator will begin to blink.
If you get your honda serviced at a dealership you should not have to worry about resetting your maintenance minder light. The technician that completed your services should do it for you. Turn the ignition to run (one position before starting engine).
If Your Vehicle Has An Ignition Button, Press The Power Button Twice Without Step On The Brake Pedal.
Turn the ignition to run, one position before starting engine. Release the knob and turn the ignition off. Turn the ignition on (before starting the engine).
2006, 2007, 2008, 2009, 2010, 2011, 2012.
Hold down the odometer reset for 10 seconds, until the wrench flashes. This will allow you access to the engine control unit (ecu) and jumper plug (service connector). Press the “select/reset” knob for more than 10 seconds, the indicator.
The Oil Life % And The Maintenance Codes Begin To Blink.
Turn the ignition off and then start the engine to verify the indicator has been reset. If your display reads “engine oil indicator %”, press and hold the select/reset knob for more than 5 seconds. The engine oil life indicator and the maintenance code s will blink.
Select The Maintenance You Want To Reset (Oil Life, Or Specific Minder Code).
Turn the ignition to the “run” position. Release the knob, then press and hold it again for 5 more seconds. Gear to the park position.
Press The Select/Reset Button Until The Engine Oil Life Indicator Is Displayed.
Close all doors, gear to the park position. Display the engine oil life by repeatedly pressing the select/reset button. How to reset oil service light honda accord.